Malossi RS24 Rear Shock for Aprilia SR50 Ditech with Piaggio Engine 4613055

Description

Malossi RS24 Racing Shock for Aprilia SR 50 DiTech with Piaggio engine. If the intake manifold on your Aprilia SR 50 is attached with two bolts, you have a Piaggio engine, and this shock will work. If the intake manifold is attached to the engine with four bolts, you do not have a Piaggio engine, and this shock will not work. It is your responsibility to determine which engine you have and whether or not this shock will work. We do not know which engine you have.  Also does not fit SR50 Motard with 4 stroke engine.
36 mm diameter piston with two independent lamellar packs, one in extension and one in compression; lamellar system made of harmonic steel with leaf spring configuration. 307mm length.
LUBRIFLON-PTFE B70 piston runner guide (bronze-loaded modified compound)
Sliding on GUIDA DU guide bushing (a composite material obtained by sintering a layer of spheroidal bronze on a mild steel strap properly treated, followed by impregnation and coating with a mixture of PTFE + PB)
Polyester resin SEALTHANE grade 9345 scraper ring
38NCD4 alloy steel  14mm diameter shock absorber rod, hardened and tempered with hard chrome deposit thickness 25/30 microns (superficial hardness of the untreated shaft HRC 55/60)
We usually ship same or next business day.
All sales are final.